|
|
Build Your Online Product Catalogs?
Product Feature of silicone rubber for electronic potting compound HY-9060# is a kind of low viscosity, Inherent flame resistance, two components electronics cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. The flame retardant UL94-V0 level can be achieved. It mainly applied in electronic components surface with materials of PC(Poly-carbonate),PP,ABS,PVC, etc. and metal materials.
Typical Application of silicone rubber for electronic potting compound
HY-9060# is suitable for
- high powered electronics,
- DC/DC module and circuit board which requires heat dissipation and high temperature resistance.
It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.
Technical Parameters of silicone rubber for electronic potting compound
Features Part A Part B
Before Curing Appearence Gray Fluid White Fluid
Viscosisty(25°Ccps) 3000±500 3000±500
Operation features Mixing Ratio 1:1
Viscosisty(after mixing) (cps) 2500~3500
Operating Time(25°C hr) 120
Curing time (min,25°C) 480
Curing time(80°C hr) 20
After Curing Hardness(Shore A) 60±5
Thermal conductivity [W(m·K)] �.8
Dielectric Strength(KV/mm) �5
Permittivity(1.2MHz) 3.0~3.3
Volume Resisivity(Ω·cm) �.0×1016
linear expansibility [m/(m·K)] �.2×10-4
Fire Resistance 94-V0
(Pls note: the above data for this product in 25 °C temperature, 55 percent humidity conditions, for reference. The accurate data is measured by customers to when using.)
TECHNICAL GUIDELINES of silicone rubber for electronic potting compound
1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
2, Weight Ratio: part A: part B = 1:1
3, Deaeration the mixture in vacuum pump under 0.08 *** for 3-5 minutes.
4, The temperature in |
| Company: |
shenzhen hongyejie technological co***ny
|
| Contact: |
Ms. yif gu |
| Address: |
Building 4, No.6 Laiying Road, Xin Sheng Long Shan Industrial ZoneLong Gang District, ShenzhenGuangdongChina |
| Postcode: |
518117 |
| Tel: |
8675589948019 |
| Fax: |
86075589948030 |
| E-mail: |
|
|
|
|
Home
